2008 Daytona 675 Specification
Engine  
Type: Liquid-cooled, DOHC, in-line 3-cylinder
Capacity: 675cc
Bore/Stroke: 74.0 x 52.3mm
Compression Ratio: 12.65:1
Fuel System: Multipoint sequential electronic fuel injection
Ignition:

Digital - inductive type - via electronic engine management system 
Transmission  
Primary Drive: Gear
Final Drive: O ring chain
Clutch: Wet, multi-plate
Gearbox:

6-speed, close ratio
Cycle Parts  
Frame: Aluminium beam twin spar
Swingarm: Braced, twin-sided, aluminium alloy with adjustable pivot position
Wheels: Front: Alloy 3 spoke, 17 x 3.5in
Rear: Alloy 3 spoke, 17 x 5.5in
Tires: Front: 120/70 ZR 17
Rear: 180/55 ZR 17
Suspension: Front: 41mm USD forks with adjustable preload, rebound and compression damping
Rear: Monoshock with piggy back reservoir adjustable for preload, rebound and compression damping
Brakes:

Front: Twin 308mm floating discs, 4 piston radial calipers with radial master cylinder
Rear: Single 220mm disc, single piston caliper
Dimensions  
Length: 2010mm (79.1in)
Width (handlebars): 673mm (26.5in)
Height: 1109mm (43.7in)
Seat Height: 825mm (32.5in) 
Wheelbase: 1392mm (54.8in)
Rake / Trail: 23.5º/86.8mm 
Weight (Dry): 165kg (363lbs)
Fuel Tank Capacity:

165kg (363lbs)
Performance (measured at crankshaft to DIN 70020)
Maximum Power: 125PS (123bhp) at 12,500 rpm
Maximum Torque:

72Nm (53ft.lbf) at 11,750 rpm
Colors: Scorched Yellow, Tornado Red, Graphite & SE Black with Gold Wheels (limited - contact us for details)
Warranty: 2 years; unlimited mileage
Service Intervals: 6000 miles or one year, whichever comes first